Certain features are not available on all ADIX models. extensions in your ADIX system. Pressing the [ICM] For more information, refer to the ADIX Owner’s button connects you to an intercom line for Manual or contact your authorized Iwatsu conversation with other extensions. distributor. BASIC FEATURES...
Lift the receiver (handset) building is sent to the PSAP along with the call. Check Press [PARK] with your system installer or Authorized Iwatsu Dial the number of the extension where the call is Distributor to make sure your system is programmed parked, or press the extension button (if assigned) for Enhanced 911 Service.
To delete a call record from system memory Lift the receiver (handset) Press the [FEAT] button and dial 34 With a call record displayed, press the [USD] Dial the number of the extension where the call is parked, or press the extension button (if assigned) To make a call by automatically dialing the Caller ID number Lift the receiver (handset)
To Activate / Deactivate or Change the Voice Mail To answer a call ringing at another extension Monitor Mode: When you hear the Call Coverage tone or see the While your station is idle, press [SPKR] green Call Coverage lamp indication on your phone Press [FEAT] Lift the receiver Press the [Voice Mail Monitor] key...
Add-on (up to one outside + three inside parties or Do Not Disturb four inside parties) If you do not wish to be disturbed, you can set your While speaking on a CO or ICM call extension to prevent any calls from ringing to or Press the [TRAN] button and dial the extension getting through to your extension.
Flexible Call Forwarding Set Follow Me Destination You can set your phone to forward calls to another Lift the receiver (handset) extension or to an external telephone number. To Press [FWD] + [FWD] forward calls externally, you must first register the Enter the Call Type you wish to forward external telephone number to a personal speed dial 1 = All calls (CO/Intercom)
Page 8
Paging To register several speed dial numbers After entering a phone number, press the [SPEED] Lift the receiver button Hold down the [PAGE] button Enter another speed dial code number When you hear the confirmation tone, make your Repeat same procedure. announcement by speaking into the receiver Press the [FLASH] button.
Page 9
Quick Dial To display a stored text message Press [TEXT MSG] + # to display a stored text Lift the receiver Press the [SPEED] button, then dial the SPEED DIAL message CODE To respond to a stored text message by calling the The system will automatically dial the registered originating extension number.
VOICEMAIL QUICK GUIDE The system will initiate an E-Response Help The following features are accessible with the Omega-Voice Call to the stations in your E-Response Group VMI. For information about other voicemail systems, please and/or a paging system. consult the appropriate documentation. To Access Mailbox: Universal Night Answer 1.
Page 11
Press * Whisper Page Depending on the hardware, software and programmed functions in your ADIX system, available features and feature operations may differ from those listed in this guide. For more information contact your authorized Iwatsu distributor. TELECOMMUNICATIONS PRODUCTS 201-935-8580 www.iwatsu.com...