Headset Connection; Hot Line - Iwatsu ICON Series IX-5910 Owner's Manual

HEADSET CONNECTION

ECS telephones may operate with a headset instead of the handset (receiver).
The Iwatsu ICON Series, ECS Platinum Series, IX-12IPKTD-E, and the
IX12IPKTD/-E2 IP Telephones and the IX-12KTD/S-3 Digital Key
Telephones have an integrated headset jack on the back of the phones. Use
of the headset on all other ECS Digital Key telephones requires the handset
to remain in the cradle of the telephone and the headset control key to be
switched to the ON position.
Note:
Refer to the Bluetooth section in this chapter for information regarding
Bluetooth headsets.
Operation
To make a call:
Press the key representing the type of call you wish to place
Wait for the dial tone
Dial the desired number
To answer a call:
Press the key representing the incoming call
To hang-up:
Press the Release key RLS
To transfer a call:
Press the Transfer key TRAN
Dial the desired extension number
Or
Press the key representing the desired extension if assigned as
a Multipurpose key
Press the Connect key CNCT

HOT LINE

If your phone is programmed to have this feature every time you lift the
receiver or press the Speaker key SPKR a call will be placed to a
predetermined extension.
Operation
Lift the receiver
Or
Press the Speaker key SPKR
DIGITAL TELEPHONE USER GUIDE - 224