Iwatsu ICON Series IX-5910 Owner's Manual page 187

For External/PSD:
Select the External Destination Type - Personal Speed Dial Bin or
External Number:
External Number - Enter external number where you want your calls
forwarded and press Enter.
Note: The external number is stored in Personal Speed Dial Bin.
Personal Speed Dial Bin - If you have personal speed dial numbers
programmed, you can select one of those entries.
Enter a label for the number you just entered and press Enter to
continue.
After programming Call Forwarding, you must activate a forward
destination.
Activate a Forward Destination
From the Self-Labeling Display Menu:
Press the Call FWD menu key on your display.
Select the key that corresponds to a pre-programmed forwarding
destination.
The selected forward destination will flash when activated and a red
LED will appear on the Call FWD key.
Press Exit to return to the main menu.
Forward Status / Inactivate
To check the Forward status of your phone or to cancel station forwarding:
Press the Call FWD menu key. The active selection will be flashing and
your status will appear on the top two lines of the display.
Press the corresponding key to inactivate call forwarding.
Press the Exit to end the operation.
Call Forward—Follow-Me
Set Follow Me (From the destination extension)
Press the Call FWD menu key.
Select the Follow-Me key.
Enter the number for the extension you are forwarding from.
Press Enter.
Press Exit to end the operation.
Cancel Follow-Me (From the forwarded station)
Press Call FWD.
Select the flashing (active) entry.
Press Exit to end the operation.
DIGITAL TELEPHONE USER GUIDE - 167