Iwatsu ICON Series IX-5910 Owner's Manual page 200

EZDial (18i/d only)
Your Iwatsu Enterprise 18i/d can be programmed to have one to ten direct
station selections located in the EZDial directory. (This feature will not
appear unless programmed in the system database by your authorized Iwatsu
Distributor.)
Note: When a change is made to your EZDial programming, it is important to
reset your Iwatsu Enterprise 18i/d telephone for the EZDial change(s) to take
effect.
To Access the EZDial Directory:
Press the EZDial menu key.
Press the menu key next to the station name or number you wish to call.
Forward
Set Forward Destination
From the Display Menu:
Press the Forward (or Scroll > Fwd) menu key on your display.
Press Set.
Enter the Call Type you wish to forward.
CO & ICM (Outside/Intercom).
CO Only (Outside).
ICM Only (Intercom).
CO and ICM calls can be forwarded to different numbers.
Enter the Destination:
Internal (Int) - Enter the Forward Mode for Internal Calls.
All calls to another extension or hunt group.
Busy/NA (B/NA) calls to another extension or hunt group.
No Answer (NA) calls to another extension or hunt group.
Enter the extension number for forwarding.
External (Ext) - Enter the destination using Personal Speed Dial Codes
90-99.
Press the Speaker key to end the operation.
An asterisk* will appear next to the Forward feature on your display when
the station has been forwarded.
Forward Status / Cancel
To check the Forward status of your phone or to cancel station forwarding:
Press the Forward (or Scroll > Fwd) menu key—only once to
see the current status.
The 12i/d will first display the current forward status for two seconds.
Press Clear, to cancel forwarding.
Press the Speaker key to end the operation.
DIGITAL TELEPHONE USER GUIDE - 180