Floating Outside Line Group Access; Forced/Verified Account Code - Iwatsu ICON Series IX-5910 Owner's Manual

FLOATING OUTSIDE LINE GROUP ACCESS

Allows for a number of outside lines to be assigned to one of 250 groups.
These groups may be used for incoming calls, outgoing calls or both
incoming and outgoing calls.
Operation
To access an outside line group:
Lift the receiver
Press the Float key FLT then dial the outside line group
number
Or
Press the Float key FLT for the desired group if that group is
assigned as a Float key on a Multipurpose key
Multiple Float keys may be assigned to one group.

FORCED/VERIFIED ACCOUNT CODE

Requires you to enter a 1-12 digit code to make outside calls. These codes
may be either fixed or variable in length and each telephone may be
programmed for one of the four following account code entry options.
FORCED-TOLL:
FORCED-ALL:
VERIFIED-TOLL: code entry required only for toll calls
VERIFIED-ALL:
A table of 10 phone numbers may be programmed to allow calling without
account code entry. This option is very helpful because it allows important
emergency numbers to be dialed by anyone. The verification table, for
verified account code entry, shares memory with System Speed Dial and
may contain 2000 account codes. The Forced/Verified Account Code
programming allows the option of having or not having the account
displayed on the LCD of the phone and the SMDR printout.
Operation
Lift the receiver
Press an outside line key
Wait for the dial tone
Dial the desired phone number
Dial
Wait for the account code entry tone
Dial a code
Dial only if your code entry is variable in length
DIGITAL TELEPHONE USER GUIDE - 220
-
or for the desired group
code entry required only for toll calls
code entry required for all calls
valid code entry required for all calls