Station Class Restriction Change - Iwatsu ICON Series IX-5910 Owner's Manual

STATION CLASS RESTRICTION CHANGE

The Iwatsu Enterprise-CS may be programmed to allow different outside
calling restrictions to be set based on Day and Night Mode system operation.
Station Class Restriction Change allows you to instruct the ECS that an
extension or group of extensions are to always operate in either the Day or
Night Mode restriction pattern during Day Mode operation.
Operation
This feature is performed by using the display and the Soft Function keys.
To get to the Station Class Restriction Change prompts:
Press the ETC key one time and the display will show:
GNT
F1
Press the F2 SSC key and the display will show:
***Station Service Class (EXT)***
Service Class Mode <EXT_>
DISP GRP
F1
To change the restriction for an individual extension:
Dial the extension number and the display will show the
current mode:
Service Class Mode <EXT 207>1
Dial 1 for Day Mode
Dial 2 for Night Mode
Press the END key
To change the restriction for a group of extensions:
Press the F2 GRP key and the display will show:
***Station Service Class (Group)***
Service Class Mode <Group_>
DISP
F1
Dial the extension group number
display will show the current mode:
Service Class Mode <Group 1>1
Dial 1 for Day Mode
Dial 2 for Night Mode
Press the END key
ATTENDANT CONSOLE USER GUIDE - 309
SSC TAC MWC SPDR
F2 F3 F4 F5
F2 F3 F4 F5
F2 F3 F4 F5
F6
F6
F6
-
and the