IX-HSHG
Handset Hanger Assembly. The optional IX-HSHG is available in both black
and white to match the IX-12KTD-3 and IX-12KTS-3 Digital Key Telephones
and IX-12IPKTD and IX-12IPKTD-E IP Telephones. The Handset Hanger
Assembly provides a more secure station handset cradle for wall-mounted
stations.
POWER SUPPLY DESCRIPTION
The IX-PWSE is the main power sources for the Iwatsu Enterprise-CS IX-
CME cabinet. Additional power supplies are also used to provide power to
certain circuit cards and station terminals when installed in the system
IX-PWSE
The IX-PWSE power supply generates the DC voltages required for system
operation. The DC output voltages of the power supply are +5 VDC, +8
VDC, -8 VDC and +24 VDC. These voltages are converted from the 120
VAC commercial power supply or the +24 VDC emergency backup battery
at the main power supply unit.
IX-PWSES
The IX-PWSES power supply generates the DC voltages required for system
operation. The DC output voltages of the power supply are +5 VDC, +8
VDC, -8 VDC and +24 VDC. These voltages are converted from the 120
VAC commercial power supply. This power source supports a single IX-
CME cabinet does not support a battery backup.
IX-EXPWS
The IX-EXPWS power supply generates the DC voltages required for the
ECS expansion modules. The DC output voltages of the power supply are
+5 VDC, +8 VDC, -8 VDC and +24 VDC. These voltages are converted
from the 120 VAC commercial power supply or the +24 VDC emergency
backup battery.
IX-DCDCM
This unit provides -48 VDC talk battery. Required for off-premise single
line telephones (IX-4SUBL), E&M Tie Lines (IX-4EMTK), and Ground
Start outside lines (IX-8UNTK). The IX-DCDCM must be installed on the
same shelf as the cards mentioned above.
GENERAL DESCRIPTION - 37