Caller Id Pass Through On Tol Transfer To External Number; Caller Id Trunks; Ccsu Serial Number / Ecs Software Version Display - Iwatsu ICON Series IX-5910 Owner's Manual

This feature is enabled for all or disabled for all of the following keys on a
specific station and the key(s) must be programmed on an Iwatsu ICON
Series self-labeling key:
CO Line Keys
Float Keys
Individual Park Keys
Group Park Keys
Note: The IX-59DS only supports the Group Park key. CO Line, Float, and
Individual Park keys are not supported on the IX-59DS.
CALLER ID PASS THROUGH ON TOL TRANSFER TO
EXTERNAL NUMBER
ECS Software Version 8.0 includes a new feature that enables the Iwatsu
Enterprise TOL system to send the ECS the original caller ID received from
an incoming CO call when TOL transfers (trombone transfer) the incoming
CO call to an outside number through a PRI or SIP trunk. If the PRI or SIP
carrier accepts replacement of the calling party number, then the called party
can see the original Caller ID instead of the Caller ID of the ECS.
Note: Some PRI and SIP carriers do not accept changes to Calling Party
Number (CPN). This feature is not applicable with those carriers. Dealer is
responsible for verifying carrier support for this feature.
This feature requires Iwatsu Enterprise TOL version 8.0, ECS Software
Version 8.0 and an ECS Software version 8.0 License (PN: 000347).

CALLER ID TRUNKS

Iwatsu Enterprise-CS will support Caller ID trunks provided by the phone
company. The IX-8PSUB-2 with the IX-400-2, IX-8UNTK, IX-8CITK, IX-
408 or IX-044 with IX-400 is required for caller ID operation.
CCSU SERIAL NUMBER / ECS SOFTWARE VERSION
DISPLAY
The IX-CCSU Serial Number and ECS Software Version Display feature
allows a technician or user to display the last six digits of the IX-CCSU
Serial Number and the ECS Software Version from any attendant position
by dialing FEATURE + 93.
SYSTEM FEATURES - 66