Iwatsu Enterprise-Cs Features; 911 Support; All Ring Hunt Group Name Display On Intercom Call; Auto-Discovery Mode - Iwatsu ICON Series IX-5910 Owner's Manual

IWATSU ENTERPRISE-CS FEATURES

This section explains some of the major system features in your Iwatsu
Enterprise-CS.

911 SUPPORT

At default, Iwatsu Enterprise-CS is programmed to automatically contact your
local Public Safety Answering Point (PSAP) when 911 is dialed. In addition,
Iwatsu Enterprise-CS is one of the only systems that support Enhanced 911
Service. Enhanced 911 Service ensures that when 911 is dialed from a system
extension, information that allows the PSAP to identify the caller's location in
a building is sent to the PSAP along with the call. Check with your system
installer or Authorized Iwatsu Distributor to make sure your system is
programmed for Enhanced 911 Service.
ALL RING HUNT GROUP NAME DISPLAY ON
INTERCOM CALL
When an intercom call is placed to an all ring hunt group, the ECS can be
programmed to display the calling party extension number and the hunt
group name on the display of an Iwatsu ICON telephone. The primary
purpose of this enhancement is to provide additional detail about the caller's
location when integrating the ECS with a nurse call system.
Note: This feature is not supported on outside line calls to an all ring hunt
group.

AUTO-DISCOVERY MODE

Iwatsu Auto-Discovery Mode is a propriety network protocol developed by
Iwatsu that allows the ICON series IX-5930/IX-5910 IP Telephone to
automatically identify itself on the local network and connect to the ECS
system. Iwatsu Auto-Discovery is available when the IP telephone is in the
factory default configuration. If the IP telephone has been previously
configured, the IP telephone can be defaulted or can be configured using the
Manual Quick Setup or the Manual Setup Advanced.

AUTOMATIC ANSWER

When the Iwatsu Enterprise-CS is placed in the Automatic Answer Mode the
system automatically answers incoming calls on lines assigned as Auto
Answer Lines in the database programming. The system sends either the
Mode 1 message (Automatic Answer-Time) or Mode 2 message (Automatic
Answer - Day) to the caller, and then disconnects the call. The IX-MSGU is
required for this feature. If a customized message is desired, the IX-CMSG-1
SYSTEM FEATURES - 61