Centsys VECTOR2 Installation Manual page 59

Another benefit of using the shift button system is that it requires
both hands to operate the two button combination.
This prevents the user from accidentally enabling sensitive functions
such as holiday lockout on the controller
Each transmitter learned into the system is assigned a unique
transmitter ID.
Press valid button
If the remote controls menu has been locked as discussed later, only by
pressing a button of a transmitter learned into the system, can the
controls menu be accessed
Add remote
Any button can be set to control the Trigger, Pedestrian, Free-exit, Holiday
Lockout or Courtesy Light Control (Aux) inputs. When adding transmitters, it
is recommended that a record be kept of the ID number allocated by the
system to each respective transmitter and the person to whom the transmitter
is given. This is necessary should selective deletion be required at a later stage
Delete remote
Transmitters can be deleted at any stage according to one of the following
methods:
Delete remote by ID
Each transmitter can be deleted individually according to its unique ID. To
facilitate this, a record of the ID and the person to whom the ID has been
assigned must have been made at the time of learning the transmitter into
the system. The transmitter is not required for this operation
Delete remote button
The operation of a button of a particular transmitter can be cleared. For
example, it allows the Holiday Lockout function set on one remote button
of a transmitter to be cleared, without affecting the other operations that the
same transmitter performs. The transmitter is required for this operation
Delete remote by button
Use this procedure to remove the transmitter from the system. All button
functionality will be removed. The transmitter is required for this operation
Delete all remotes
Clears the entire memory. All transmitters will be removed
Edit remote button
Change the function of one button to perform another function. For example,
button one's function is to open the gate completely. To change this, use the
edit remote button, select Ped, and button one of the same remote will now
only open the gate to pedestrian
Transmitter menu locked
Allows the remote controls menu to be locked, preventing the unauthorized
addition of new transmitters to the system. Once enabled, the remote
controls menu can only be accessed by pressing a valid transmitter button
Page 55
remote