Required Tools & Equipment - Centsys VECTOR2 Installation Manual

6. Required tools and equipment
Spanner - 17mm, 15mm, preferably socket set
Crimping tool and pin lugs
Hammer
Electric drilling machine
20mm hole saw
Screwdrivers - 6mm Philips, 3.5 Flat
Pliers
Connector block
2 x G-clamps
Masonry Bits - 12mm; 10mm for wall mount brackets; steel bits 6.5mm/10.5mm
6mm Pin punch
Angle Grinder
Measuring tape
Hacksaw
5mm Allen key
Welding machine (including consumables and safety equipment
Soldering iron
Spirit level
Extension cord
Marking pen/chalk
Safety equipment (goggles, gloves, etc.)
Page 14