Centsys VECTOR2 Installation Manual page 57

Pre-release time
Sets the time period (in 0.1s increments) for which the lock releases BEFORE
the gate has started moving. This is useful in cases where premature gate
movement prevents the lock from releasing
Lock location
Specifies whether the gate is locked while closed, open of both
Lock drive
Specifies if the lock is to be powered by an AC or DC voltage. Selecting AC will
power the lock with a 50Hz square wave
Menu 9 - Courtesy (pillar) light
This feature is associated with the light connections on the controller. Refer to
Section 16 of the manual for details on how to connect a pillar or security light to
the controller
The Pillar Light circuit has multiple functions:
It operates as a Courtesy Light and switches on for a selectable time period
every time the gate is activated
The Courtesy Light can also be turned on for the same time period by
momentarily connecting the Aux terminal to the Com terminal via a pushbutton
The courtesy light can also be turned on permanently by connecting the Aux
terminal to the Com terminal via a pushbutton, for three seconds. A short
pulse thereafter will switch the lights off. The status LED will flash once every
two seconds to indicate that the courtesy light is on permanently. The
abovementioned facility can also be achieved via a remote learned to the
system and mapped to the courtesy light function from within the remotes
menu
The gate will not open when using the Aux trigger input
When the Ped input is triggered, the courtesy light flashes for an adjustable
(1 to 255 seconds) pre-flash time, before the pedestrian gate opens
Courtesy light time
The time that the courtesy light will remain activated can be set from four
seconds to ten hours in one second increments
Light profile
The courtesy light can be selected to operate according to one of the
following:
Courtesy light as explained earlier
Pre-flashing Mode
If Pre-flashing Mode A, B or C is selected, the behaviour of the courtesy
light will be as follows:
Mode A will turn on the courtesy light only while the gate is moving
Mode B will flash the courtesy light during the pre-opening and pre-
closing delays, as well as while the gate is moving
Page 53