Lcd Display - Centsys VECTOR2 Installation Manual

LCD display

The LCD display shows useful information regarding the status of the system.
S Sens1
S Sens2
M Sens1
M Sens2
Sens+
Sens-
Safe CLS
Safe OPN
Com
LCK/STP
TRG
PED
Com
1. Battery icon
Indicates the state of charge of the battery.
Four solid bars = full capacity
Two solid bars = 50% capacity
No solid bars, with the icon flashing = battery empty
2. Mains icon
Displays the presence/absence of mains voltage:
Plug solid = mains present and battery charging
Plug hollow and flashing = No mains present and battery not charging
3. Autoclose information
Displays the state of the Autoclose function
Displays off if Autoclose is not selected
OVR if Autoclose is overridden, and the remaining Autoclose time if Autoclose is
active
POVR indicates that the PIRAC option is overriden
4. Pillar light information
Displays the remaining light time if courtesy light mode is selected
Pre-flashing mode is displayed if pre-flash is selected
LIT will be indicated if the pillar light has been turned on permanently
5. Onboard receiver information
Displays the current input being activated by the onboard receiver.
6. Status information
Displays useful information regarding the status of the gate.
0:00
A OFF L
CLOSED
FIGURE 72. CONTROLLER SCREEN
Page 62