Monitor Connections - Raymarine G-Series system Installation & Commissioning Instructions

4.4

Monitor connections

Connect the G-Series marine displays to both the GPM400 proces-
hs
sor and SeaTalk switch.
Camera
Monitor
GPM 400
hs
SeaTalk switch
hs
SeaTalk
G-Series Installation & Commissioning
Camera
Repeat Monitor (optional)
DVI or VGA
DVI or VGA
hs
SeaTalk
Monitors may be connected to the GPM400 using either VGA or
DVI cable.
HS switch
Monitor
VGA DVI
Input Input
Repeat displays
Repeat displays (if used) show the same information / page as the
master display. For this reason each display within a Nav Station
must be connected to a different GPM400.
Note: During start-up only the master display will show the boot
sequence and start-up information.
Maximum quantity of monitors
The G-Series system will support up to 8 monitors (2 per GPM400).
38
GPM 400
hs
SeaTalk
VGA
hs
SeaTalk
input
adaptor
cable
VGA
Input
OR
Network selector switch
(in UP position)
Power Cable
DVI
Input