Viewfinder/Lcd Monitor Indications.46 - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Viewfinder/LCD Monitor indications
Tape remaining and battery charge level can be displayed.
FULL
EMPTY
Battery
Remaining:
Tape
Remaining:
ca - (No tape)
3 ca
i
Set POWER to CAMERA.
Press DISPLAY repeatedly to select
the following displays.
FULL
i—n ra c
r — T) 2
ca
£3
ca e
Tape remaining indicator operates a few
3 EMPTY seconds after tape starts moving.
Recording the Date and Time
1
2
Do steps 1 and 2 above to select time/date,
date only, or no display.
Start a recording (page 23).
• Only the Date and/or Time are recorded.
Display-Off Mode
No Indication, except Intelligent Titler (pages
43-45), will be displayed.
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA or VCR.
Press MENU for MENU mode.
Press UP A or DOWN ▼ to select
Press DISPLAY to select OFF.
Press MENU to exit.
DISPLAY
1
2
3
Press DISPLAY repeatedly to remove time/date.
Indications are restored when Camcorder is turned off,
and then on again.
CAMERA MODE
46
' PAGE 2/2
--- MENU
UTWflfAa ; ON
SELF DEMO, i OFF
SECURITY : OFF
VIDEO EFFECTS ; FADE
BlACK
CTOCKSET
UM&R : ON
SELECT : PUSH ▼/* KEY
SET : PUSH DISPLAY KEY
END t PUSH MENU KEY
SELECT : PUSH KFY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY J
VCR MODE
For assistance, please call : 1 -800-211-PANA(7262)
or send e-mail to : consumerproducts@panasonic.com