Installing The Processor Heat Sink - Fujitsu PRIMERGY TX100 S2 Service Supplement Manual

Replacement routines
4.7.3

Installing the processor heat sink

Part number: V26898-B953-V300
Figure 79: Installing the processor heat sink (A)
Ê Carefully seat the heat sink (V26898-B953-V300) on the four threaded holes
as shown.
V
CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes.
– Ensure that the heat sink cooling fins match the direction of the
airflow!
94 Service Supplement
TX100 S2