Removal Of Pcb - Daikin Super Multi NX C-Series Service Manual

SiE12-411
1.4

Removal of PCB

Procedure
Step
1. Removing the controller
PCB
1 Release the tab of the
electrical box, and open
the terminal board.
2 Disconnect each
connector of the
terminal board.
3 Unscrew 1 screw and
release two tabs to
remove the PCB
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Base bar
Outdoor Unit (80 / 90 Class)
Tabs
Points
Tab
227