Removal Of Four Way Valve Coil, Solenoid Valve Coil, Electronic Expansion Valve Coil And Thermistor - Daikin Super Multi NX C-Series Service Manual

Outdoor Unit (50 / 52 / 58 / 68 / 75 Class)
2.6 Removal of Four Way Valve Coil, Solenoid Valve Coil,
Electronic Expansion Valve Coil and Thermistor
Procedure
Step
1 Remove 1 screw of the
four way valve coil.
2 Remove one screw of
the solenoid valve coil.
3 Remove the electronic
expansion valve coil for
each room.
4 Release the thermistor
presser spring, and
remove the discharge
pipe thermistor.
250
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Discharge pipe
thermistor
" Place the thermistor so that
its end comes up to the end
of the presser spring.
" Be careful not to lose the
Thermistor
presser spring for the
presser
spring
discharge pipe thermistor.
Thermistor
Pipe
SiE12-411
Points
Thermistor
presser
spring
Removal Procedure