Removal Of Electronic Expansion Valve And Thermistor - Daikin Super Multi NX C-Series Service Manual

Outdoor Unit (80 / 90 Class)
1.6

Removal of Electronic Expansion Valve and Thermistor

Procedure
Step
1 Remove each wire
harness.
2 Take off the putty, and
remove each
thermistor.
3 Remove the electronic
expansion valve coil.
232
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
SiE12-411
Points
" Place the thermistor so that
its end comes up to the end
of the presser spring.
" Be careful not to lose the
presser spring for the
discharge pipe thermistor.
Thermistor
Thermistor
Pipe
presser
spring
S90:
" Outdoor air thermistor (Blue)
" Heat exchanger thermistor
(Gray)
" Discharge pipe thermistor
(Black)
S92: Gas pipe thermistor
" Room A (Black)
" Room B (Gray)
" Room C (Brown)
" Room D (Red)
S93: Liquid pipe thermistor
" Room A (Black)
" Room B (Gray)
" Room C (Yellow)
" Room D (Blue)
Removal Procedure