Daikin Super Multi NX C-Series Service Manual page 141

Instruction
" To adjust the vertical blades (louvres)
Hold the knob and move the louvres.
(You will find a knob on the left-side and the right-side
blades.)
Notes on flaps and louvres angles
" ATTENTION
130
• When "SWING button" is selected, the flaps
swinging range depends on the operation mode.
(See the figure.)
• Always use a remote control to adjust the flaps
angle. If you attempt to move it forcibly with hand
when it is swinging, the mechanism may be broken.
• Be careful when adjusting the louvres. Inside the
air outlet, a fan is rotating at a high speed.
In DRY mode or COOL mode
When stop operation
0˚
Upper limit in cooling
25˚
Lower limit in cooling
In HEAT or FAN mode
When stop operation
20˚
Upper limit in heating
45˚
Lower limit in heating
System Configuration
SiE12-411