Home Leave Operation - Daikin Super Multi NX C-Series Service Manual

SiE12-411
2.9

HOME LEAVE Operation

HOME LEAVE operation is a function which allows
you to record your preferred temperature and air
flow rate settings.
" To start HOME LEAVE operation
1. Press "HOME LEAVE button" .
" To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
Before using HOME LEAVE operation.
" To set the temperature and air flow rate for HOME LEAVE operation
System Configuration
• The HOME LEAVE lamp lights up.
ON
OFF
• The HOME LEAVE lamp goes off.
When using HOME LEAVE operation for the first time, please set the temperature and air flow
rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Initial setting
temperature
Cooling 25°C
Heating 25°C
1. Press "HOME LEAVE button". Make sure "
display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use this function. To change
the recorded information, repeat steps 1 – 3.
Air flow rate temperature
AUTO 18-32°C
AUTO 10-30°C
" is displayed in the remote control
" or " " as you like.
Instruction
C
HOME LEAVE
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
SILENT SENSOR
ON CANCEL
OFF
TIMER
Selectable range
Air flow rate
5 step, AUTO and SILENT
5 step, AUTO and SILENT
1, 2
137