Care And Cleaning - Daikin Super Multi NX C-Series Service Manual

SiE12-411

2.13 Care and Cleaning

FTK(X)E 25/35 B
CAUTION Before cleaning, be sure to stop the operation and turn the breaker OFF.
Units
" Indoor unit, Outdoor unit and Remote control
1. Wipe them with dry soft cloth.
" Front grille
1. Open the front grille.
2. Remove the front grille.
3. Clean the front grille
4. Attach the front grille
•
•
•
•
•
System Configuration
• Hold the grille by the tabs on the two sides and
lift it until it stops with a click.
• Supporting the front grille with one hand,
release the lock by sliding down the knob with
the other hand.
• To remove the front grille, pull it toward
yourself with both hands.
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the grille with water, dry it
with cloth, dry it up in the shade after washing.
• Set the 3 keys of the front grille into the slots
and push them in all the way.
• Close the front grille slowly and push the grille
at the 3 points.
(1 on each sides and 1 in the middle.)
• Check to see if the rotating axis in the upper
center section is moving.
CAUTION
Don't touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury.
When removing or attaching the front grille, use a robust and stable stool and watch your steps
carefully.
When removing or attaching the front grille, support the grille securely with hand to prevent it from
falling.
For cleaning, do not use hot water above 40 °C, benzine, gasoline, thinner, nor other volatile oils,
polishing compound, scrubbing brushes, nor other hand stuff.
After cleaning, make sure that the front grille is securely fixed.
Fit the key
into the slot.
Slide up the knob.
Instruction
147