Technical Data - Graco EnergyComplete 313221H Instructions - Parts Manual

Technical Data

Maximum fluid working pressure
Maximum air working pressure
Electrical requirements
Generator Size (for EnergyComplete
Sprayer only)
Maximum Fluid Temperature
Maximum Ambient Temperature
Maximum Output
Output per Cycle (A side, white fluid)
Output per Cycle (B side, red fluid)
Overpressure Relief
Heater Power
Sound Pressure
Sound Power, per ISO 9614-2
Fluid Outlets
Air Inlet
Air Outlet
Gun Compressed Air Requirements
Weight
Wetted Parts
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
313221H
2000 psi (14 MPa, 140 bar)
100 psi (0.7 MPa, 7 bar)
Model 256765: 120 Vac, 1 phase, 50/60 Hz, 5100 W; requires three
separate, dedicated 15 A circuits
Model 257089: 120 Vac, 1 phase, 50/60 Hz, 3500 W; requires two
separate, dedicated 15 A circuits
5500 W minimum
180°F (82.2°C)
120°F (48.8°C)
12 lb/min (5.4 kg/min) at 340 cycles/min
.00172 gal. (.0065 liter)
.00044 gal. (.0016 liter)
Recirc/Spray valves automatically relieve excessive fluid pressure
back to supply pails
120V models: 850 W each; 1700 W total
85.9 dB(A) in fast circulation mode (compressor on)
87.8 dB(A) at 2000 psi (compressor on) (14 MPa, 140 bar), 0.7 gpm
(2.6 lpm)
92.5 dB(A) in fast circulation mode (compressor on)
94.6 dB(A) at 2000 psi (compressor on) (14 MPa, 140 bar), 0.7 gpm
(2.6 lpm)
Component A (white fluid): 3/8 npt
Component B (red fluid): 1/4 npt
1/4 in. quick-disconnect industrial type pin fitting
1/4 npsm(m)
EnergyComplete SprayGun (clean-off air and operating air): 2 scfm
3
(.056 m /min)
See page 58.
Aluminum, stainless steel, carbon steel, brass, carbide, chrome,
chemically resistant o-rings, PTFE, ultra-high molecular weight poly-
ethylene
Technical Data
59