Graco EnergyComplete 313221H Instructions - Parts Manual page 13

Model
256765 - 120 V, 1 phase, 50/60 Hz,
three 15 ft (4.5 m) power cords,
Heated
257089 - 120 V, 1 phase, 50/60 Hz,
two 15 ft (4.5 m) power cord, Heated
Table 3: Extension Cord Requirements
Required Wire Size
Up to 100 ft (30 m)
AWG 12
To avoid electric shock, always unplug all cords before ser-
vicing EnergyComplete Sprayer.
1
Ensure no other high amp loads are connected
while running EnergyComplete Sprayer.
2 To verify separate circuits, plug in
EnergyComplete Sprayer or a worklight and
cycle breakers on and off.
F . 5. Use Three Separate Circuits
IG
313221H
Table 2: Electrical Requirements
Required Power Source
Three separate, dedicated circuits
rated at minimum of 15 A each
Two separate, dedicated circuits
rated at minimum of 15 A each
Heater Power
Motor Power
Power Cord Connector
Cords must be 3-conductor grounded, rated
for your environment.
1
Compressor Power
Setup
Three NEMA 5-15T
Two NEMA 5-15T
2
TI12383a
13