Startup - Graco EnergyComplete 313221H Instructions - Parts Manual

Startup

Equipment surfaces can become very hot. To avoid
severe burns:
• Do not operate EnergyComplete Sprayer without
all covers and shrouds in place.
• Do not touch hot fluid or equipment.
• Allow equipment to cool completely before touch-
ing it.
• Wear gloves if fluid temperature exceeds 110°F
(43°C).
1.
Perform Setup, pages 12-16.
2.
Set function knob to Slow Recirc
Recirc .
3.
Turn on Heater Power.
4.
Temporarily set heater control knobs to maxi-
mum setting.
5.
Circulate through heaters until temperature
readouts display desired temperature.
6.
Adjust heater control knobs as necessary for a
stable spray temperature.
18
or Fast
OR
Startup
313221H