Table of Contents
Advertisement
Maintenance
•
Check pump wet-cups fluid level daily, page 15.
•
Do not overtighten packing nut/wet-cup. Throat
u-cup is not adjustable.
•
Flush unit when shutting down for the evening.
Material is moisture sensitive and may settle out
over time.
•
If using an impingement mix gun, close gun fluid
valves A and B when not spraying. Doing this will
keep the internal parts of the gun cleaner and pre-
vent crossover. Clean gun mix chamber ports and
check valve screens regularly. See gun manual.
•
To prevent fluid from running out of sprayer during
storage or transportation, remove filter (21) and fas-
ten cap (71) over suction tube (M) when not using
sprayer.
71
22
M
21
Maintenance
313221H
Advertisement
Table of Contents
Troubleshooting
