Receiving An Emergency Call
When receiving an emergency call on the selected
group and system, an alert beep is heard and
on. The message
line two until the emergency condition is cleared.
Declaring An Emergency Call
To send an emergency call to selected system and
group (or on an optionally preprogrammed group), pro-
ceed as follows:
1. Press and hold the red EMERGENCY button that is
on top of the radio in front of the antenna for approxi-
mately one second (this time is programmable and
therefore could be longer or shorter; check with the
system administrator). The radio will transmit an
emergency call request with the radio ID until an
emergency channel assignment is received.
2. When the working channel assignment is received,
the radio sounds a single beep indicating the radio
has auto keyed (see Auto Key) and is ready for
voice transmission.
*TXEMER*
the emergency is cleared.
3. Press PTT and speak into the microphone in a
normal voice.
4. Release PTT when the transmission is complete.
38
*RXEMER*
flashes on line two in the display until
and
flashes in the display on
momentarily turns on.
comes