Table of Contents
Advertisement
The following steps are required to dial these numbers:
SCAN Radio:
1. Follow the procedure in Sending A Telephone In-
terconnect Call (Trunked Mode Only) to establish
a connection to the telephone system or consult the
system administrator for the procedure to access a
dial tone on the trunked or conventional system.
2. Overdial numbers are transmitted by entering the
M
phone mode using the
Press
and follow the selection mode rules to call up a
stored number from the phone list.
Press PTT to send the overdial sequence once. If
the number needs to be transmitted again it must be
selected or entered again (this prevents unwanted
numbers from being sent the next time the PTT
button is pressed during the call).
This overdial select/entry mode remains active until
the call is dropped, cleared, or
overdial select/entry mode can be re-entered if the
call is still active by pressing
M
to enter the overdial select/entry mode
button.
M
M
is pressed. The
.
turns on.
55
Advertisement
Table of Contents
