Table of Contents
Advertisement
normal usage of the radio. Data communications is not
supported in the conventional mode.
The radios can be connected to Mobile Data Termi-
nals (MDT) or to a host computer. Any RS-232 compat-
ible device that supports the Radio Data Interface (RDI)
protocol (Version 1.91 or greater) may be connected to
the radio. Support for MDT's or host computers is a
programmable option per radio. Additionally, radios pro-
grammed for host computers may also be programmed
for data only operation (no voice calls transmitted or
received).
DISPLAYS
The following will be displayed in the display during
the various states of data mode of operation.
TX DATA
RX DATA
DATA OFF
DATA ON
Displayed on top line of display when the
radio is transmitting a data call.
Displayed on top line of display when the
radio is receiving a data call.
Displayed on top line of display when the
radio is in the data disabled state.
Displayed for two seconds on top line of
display when the radio is toggled to the
data enabled state.
79
Advertisement
Table of Contents
