the battery will need to be recharged to resume normal
operation.
Key Press Alert
A short tone or "beep" sounds to indicate a key has
been pressed. A short low-pitched tone indicates the key
is not active in the current mode.
TURNING ON THE RADIO
1. Turn on the radio by rotating the POWER ON-
OFF/VOLUME knob clockwise. A short alert signal
(if enabled through programming) indicates the radio
is ready to use.
2. The display shows the last selected system and
group or a default system and group (depending on
programming).
3. Adjust the POWER ON-OFF/VOLUME knob to the
desired volume level.
4. Select the desired system and group (see system
and group selection section). The display indicates
the current system and group names.
5. The radio is now ready to transmit and receive calls.
28
OPERATION