Table of Contents
Advertisement
METHOD 2: From keypad: If system selection is pro-
METHOD 3: Direct Access: Press
30
NOTE: The radio is supplied with a me-
chanical stop which can, if desired, limit
the number of positions accessed. If the
knob will not access all positions, do not
force it.
>
<
>
grammed as the primary function of
and
, select a system by pressing
, or
list. The display registers the new system
name on line one.
M
system select mode. Press the numeric
key which is mapped to the desired sys-
tem. Press
selected system.
Note: If system selection is programmed
to
the
SYSTEM/GROUP/CHANNEL
knob, direct access to systems will not be
available. Pressing
scroll through different sets of 16 systems
each (banks) if more than 16 systems are
programmed into the radio. The systems
within each bank are then selectable via
the SYSTEM/GROUP/CHANNEL knob
as described previously in METHOD 1.
to scroll through the system
. The radio will move to the
<
<
to enter the
>
or
will
Advertisement
Table of Contents
