Individual Calls; Receiving And Responding To An Individual Call (Trunked Mode Only) - Ericsson EDACS PRISM HP Operator's Manual

INDIVIDUAL CALLS

Receiving And Responding To An Individual Call
(Trunked Mode Only)
When the radio receives an individual call (a call
directed only to the user's radio), it unmutes on the
assigned working channel and turns on
on the display shows the logical ID number of the unit
sending the message, or the associated name if the ID
number is found in the individual call list. The radio can
be programmed to ring when an individual call is re-
ceived. If enabled, the ring begins five seconds after the
caller unkeys and will continue until the PTT button, the
CLEAR/MONITOR button or the individual call mode is
entered.
The volume of the ring is adjustable through the
volume control levels.
If a response is made by pressing the PTT to the call
prior to the programmed call-back time-out, the call will
automatically be directed to the originating unit. If a
response is not made before the call-back time-out, the
radio will return to normal receive display, and

*WHC*
will appear on the first line of the LCD.
To respond after the call-back time-out, press the
key. The radio's display will show the callers ID on
the first line and WHCI=1 on the second line. Pressing
the PTT button at this point will initiate an individual call
back to the original caller.
46
NOTE
. The first line