Table of Contents
Advertisement
2. Press and release the PTT button. When the radio
is clear to transmit,
the channel access tone sounds. Line one shows
the accompanying name selected from the list of
stored numbers. The message
on line two. The radio then automatically transmits
the programmed number stored in the special call
queue.
3. A telephone ring will be heard from the speaker.
When someone answers the phone, press the PTT
button and speak into the microphone. Release the
PTT button to listen to the callee. Unsuccessful
interconnect signalling returns the radio to the nor-
mal receive mode and the number remains dis-
played until the special call is cleared or the time-out
expires or another group or system is selected.
Terminate a call by pressing the CLEAR/MONITOR
button.
In half-duplex mode, only one person may talk at
a time. The radio PTT button needs to be pressed
in order to communicate to the individual called
and released for the individual called to be heard.
4. To terminate the call, momentarily press the
CLEAR/MONITOR button.
52
turns on,
*PHONE*
NOTE
turns off and
displays
Advertisement
Table of Contents
