Deleting Channels From A Scan List - Ericsson EDACS PRISM HP Operator's Manual

to non-priority scanning. The priority setting selec-
tion sequence is set and stops at priority-one; there-
fore, the channel must be deleted from the scan list
by pressing
to a previous priority setting. Any channel that is in a
system's channel scan list will show S, 2, or 1 for the
time-out period when it is the selected channel. One
of the following messages may be momentarily dis-
played:
SCAN DIS
FIXED P1
FIXD LST

Deleting Channels From A Scan List

1. With scan operation turned off select the desired
channel to delete from the selected conventional
)
system's channel scan list.
2. Press
)
status is displayed for a time-out period.
3. Press
delete the channel from the scan list. S, 2, or 1 turns
off. Any channel that is not in a conventional system
channel scan list will show a "blank" for the time-out
period when it is the selected channel.
) $
or
The radio is not programmed to scan.
A Priority 1 group has been pre-pro-
grammed into the radio. A new Priority 1
group cannot be selected.
A fixed scan list has been pre-pro-
grammed into the radio. It is not possible
to change the list without reprogramming
the radio.
(Scan) or
'
or during this time-out period to
before the channel is set
'
(System). The current
85