Programmable Entries; Prestoring Individual And Telephone Interconnect Calls From The Keypad (System Model Only) - Ericsson EDACS PRISM HP Operator's Manual

Prestoring Individual and Telephone Interconnect
Calls from the Keypad (System Model only)
Individual Call ID numbers, telephone numbers and
other number sequences for overdialing are stored in the
special calls lists when programming the radio. The first
ten entry locations of these lists can be changed by the
radio operator. The keypad is used when adding, chang-
ing and storing numbers in these entry locations.
Use the following procedure to store a number in one

of the first ten entries of a special call list:
1. Press
the phone call list.
2. Scroll through the list using the
one of the first ten entries is reached.
is displayed if the location is empty.
next time the PTT button is pressed during
the call).
M
This overdial select/entry mode remains
active until the call is dropped, cleared, or
is pressed. The overdial select/entry
mode can be re-entered if the call is still
active by pressing

PROGRAMMABLE ENTRIES

*
or to enter the individual call list or
*
.
<
turns on.
>
or until
NO ENTRY
57