Scan Lockout Mode - Ericsson EDACS PRISM HP Operator's Manual

data call is immediately terminated and the radio per-
forms the desired function:
• • PTT activated.
• • Emergency declared by pressing the
grammed emergency button.
• • A group or system change.

SCAN LOCKOUT MODE

Following the transmission or reception of a data call,
if scan is enabled, scanning will stop temporarily [two
independent pre-programmed times (after receive data
call and after transmit data call)]. During this time the
scan indicator will flash to indicate that scan is enabled
but temporarily suspended. This mode is normally exited
when the pre-programmed time expires; however, the
following actions will terminate the scan lockout mode
before the timeout is completed.
• • The CLEAR button is pressed.
• • The PTT is pressed.
• • A group or system change.
• • Entering phone call mode.
• • Entering individual call mode.
• • A new emergency assignment has been received.
pre-pro-
81