BUTTONS AND KNOBS
This section describes the primary function of the
button and knob controls. Other functions associated
with these controls are detailed in later sections.
SYSTEM/
GROUP/
CHANNEL
KNOB
POWER
ON-OFF/
VOLUME
KNOB
12
Selects systems or groups/channels
(depending on programming). This
is a 16 - position rotary knob. See
SYSTEM/ GROUP/CHANNEL SE-
LECTION for details.
Note: The radio is supplied with a
mechanical stop which can, if de-
sired, limit the positions accessed. If
the knob will not access all positions
do not force it.
Applies power to the radio and ad-
justs the receiver's volume. Rotating
the control clockwise applies power
to the radio. A single alert tone (if
enabled through programming) indi-
cates the radio is operational.
Rotating the control clockwise in-
creases the volume level. Minimum
volume levels may be programmed
into the radio to prevent missed calls
due to a low volume setting. While
adjusting the volume the display will
momentarily indicate the volume
level (i.e. VOL = 31). The volume
range is from a minimum pro-