Data Lockout Mode; Conventional Mode Operation - Ericsson EDACS PRISM HP Operator's Manual

Radios

Table of Contents

• • An emergency declared or cleared.

• • Receiving an individual or phone call.

• • Receiving Agency, Fleet or System All Call.

• • Pressing

DATA LOCKOUT MODE

During the voice call scan hang time (pre-pro-

grammed) the radio will not receive data calls.

The radio functions in the conventional mode when

using conventional communications channels (non-

trunked). Each channel consists of a preset frequency

pair for transmit and receive during repeater operation,

or a single frequency for both transmit and receive during

talk-around (no repeater) operation. To use this mode,

the operator selects a conventional system which in-

cludes one or more conventional channels. Each con-

ventional channel may have one or more features, such

as Channel Guard, programmed when the channel is

selected.

The CLEAR/MONITOR button unmutes the receiver

so activity on the selected channel can be monitored.

When pressed and held for approximately 3 seconds this

button toggles conventional channel decoding (Channel

Guard, Digital Channel Guard ) on and off if programmed

for the selected channel.

to turn scan on or off.

Table of Contents