Receiving A Call - Ericsson LBI-38950 Operator's Manual

Mdr series ge-marc v•e trunked

Table of Contents

If a channel disconnect occurs before the conversation has ended, the

call must be initiated again. To avoid confusion it is recommended that

a procedure be set up so that the originator of the call is the one

designated to re-establish communications. Two or more operators

originating a call simultaneously may acquire two different channels

making communication impossible.

RECEIVING A CALL

When a call is received by the radio, the radio decodes the call. A single alert

tone will sound indicating a GROUP call has been received or a two tone alert will

sound if an INDIVIDUAL call has been received. The display will show the user the

AREA and GROUP when receiving a group call and the AREA and INDIVIDUAL

decode when an INDIVIDUAL call is received.

If a simplex dispatch call is desired, simply pick up the handset and use the PTT

switch to transmit to the caller. If the call is an interconnect call, press the

key to answer the call and place the unit in duplex.

Duplex operation must be enabled by the system operator for the tone set being

used during duplex mode. If Auto-interconnect is enabled for the AREA and the

Individual tone set being decoded, the user may enter duplex by removing the handset

from the cradle. If the handset has already been removed from the cradle when the

call is received, the user must press the

Pressing the

will toggle the radio into simplex mode.

NOTE

key and then the

key to go into duplex.

key during duplex operation

Table of Contents