Table of Contents
Advertisement
3. Enter the desired number. If necessary, a pause can
be entered by pressing and holding 0-9,
until an underscore appears in the display
(telephone interconnect only). The individual call list
entries will accept up to 5 digits. The phone call list
entries accept a combination of up to 31 digits and
pauses.
4. Press and hold
cating that the number has been stored.
5. Repeat the steps above if the number stored in an
entry location needs to be changed.
STATUS/MESSAGE OPERATION
Status operation permits the transmission of a pre-
programmed status condition to the EDACS site. Mes-
sage operation permits the transmission of a pre-pro-
grammed message text to an EDACS site.
<
STATUS OPERATION
To send a status condition, press the
lowed by
status. STATUS and 0 through 9 pre-programmed status
selections are available from the menu. If STATUS is
selected you need to enter the number of the status
message you intend to transmit. If no status has been
programmed for the selected number key, the radio will
display "NO ENTRY". A valid selection will permit the
status text to appear in the display for a pre-programmed
time. After the time-out expires or the
pressed (the
58
M
until the display changes indi-
>
or
key to select the pre-programmed
M
key will override the time-out period),
*
M
key fol-
M
key has been
, or
Advertisement
Table of Contents
