Direct Dialing Of Individual Calls (System Model Only) - Ericsson EDACS PRISM HP Operator's Manual

M
Press
stored phone numbers using the
until the desired number is displayed. Press
2. Press the PTT button; when the radio is clear to
transmit
access tone sounds. Line one shows the called
individual's name if found in the list of stored phone
numbers. The message
two.
Direct Dialing of Individual Calls (System Model
only)
The following procedures describes how to initiate
and complete a direct dialed individual call.
1. If the individual call ID is not stored in the pre-stored
list of call ID's but the individual unit ID is known, it
can be entered directly from the keypad.
Note: The ID of the last individual call made can be
recalled by pressing
2. Press the PTT button to transmit.
turns off and the channel access tone sounds. Line
one shows the called individual's ID followed by the
logical ID number of the unit being called. The mes-
*INDV*
sage
into the microphone.
. turns on. Scroll through the list of
turns on,

displays on line two. Proceed talking
<
turns off and the channel
*INDV*
displays on line
then the OPTION button.
>
M
or key
.
turns on,
49