System Radio - Ericsson EDACS PRISM HP Operator's Manual

Radios

Table of Contents

System Radio:

The following steps are required to dial these num-

bers:

1. Follow the procedure in Sending A Telephone In-

terconnect Call (Trunked Mode Only) to establish

a connection to the telephone system or consult the

system administrator for the procedure to access a

dial tone on the trunked or conventional system.

2. Overdial numbers are transmitted using either

method as follows:

METHOD 1: Press and hold PTT while entering the

METHOD 2: Press

overdial number sequence from the key-

pad. This method sends DTMF tones dur-

ing individual, telephone interconnect.,

trunked group or conventional channel

calls. Anytime the PTT button is pressed

and held, the keypad is enabled for DTMF

entry.

to enter the overdial select/en-

try mode and follow the selection mode

rules to call up a stored number from the

phone list or to direct enter the overdial

digits.

turns on. Press PTT to send the

overdial sequence once. If the number

needs to be transmitted again it must be

selected or entered again (this prevents

unwanted numbers from being sent the

Table of Contents