Scan Radio; Adding Groups To A Scan List - Ericsson EDACS PRISM HP Operator's Manual

The radio will continue scanning if a new group is
-
selected when scan is on.
Pressing the PTT button when scan is on will cause
-
the radio to transmit on the displayed group or to the
currently selected group (depending on program-
ming).

SCAN Radio

Adding Groups to a Scan List

1. Scan must be off to add/delete channels to/from the
scan list. If the scan icon
key to turn scan off.
>
2. Select the desired channel using the SYS-
TEM/GROUP/CHANNEL knob and/or the
keys. If the selected channel is currently on the
list, pressing
3. While the status is displayed, press the
add a group to the scan list. "S" is displayed on line
one.
4. Press the
)
to Priority 2. A "2" is displayed on line one.
5. Press
A "1" is displayed on line one. The priority level
section sequence only advances the group to the
next high priority level and stops at priority level 1.
40
)
will display the S status flag.
)
key a second time to set the group
a third time to set the group to Priority 1.
is on, press the
)
5
<
or
key to