Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI EC90A-AL User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

Please observe the following guidelines and follow the procedure to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
3. The 9 mounting screws on the front, both sides and bottom of the system are used
to secure the cover to the chassis. Remove these screws and put them in a safe
place for later use.
Chapter 3 Installing Devices
Chapter 3
4.
Chassis screw
Chassis screw
Chassis screw
Chassis screw
11
Lift the cover to open the system. The Mini PCIe socket is readily accessible after removing
the chassis cover.
Mini PCIe socket