Table of Contents
Advertisement
Chapter 3 - Installing Devices
Import:
To prevent damage to the system board, power down the system and remove all AC
power cords before opening the chassis cover.
1. Before installing any internal devices, please reverse the bottom of the case to the top.
2. If you need to install or replace the CPU and 2nd memory, please also remove the three screws
at each side of the box.
ES220-CS
3. After the screws was removed in last two steps, tilt up the case carefully.
4. After the upper case was removed, 2.5" SDD slots / M.2 slots appears.
12
www.dfi.com
Advertisement
Table of Contents
