Konica Minolta magicolor 2400W Service Manual page 64

Field Service Ver. 4.0 Feb. 2006
9. Type "put_XXXXX.ps" and press the Enter key.
If there are two or more firmware data files involved, repeat the same steps (XXXXXX
is the firmware data file name).
NOTE
Do not turn the printer's Power Switch OFF or ON while the firmware is upgrading.
10. After the firmware upgrading procedure has been completed, turn the printer OFF and
then ON again.
11. Print a Configuration Page (PRINT MENU → CONFIGURATION) and check the firm-
ware version to verify the upgrade.
5. Firmware upgrade
4139F2E512DA
29
2