Konica Minolta magicolor 2400W Service Manual page 63

5. Firmware upgrade
B. Network connections
1. Connect the machine to the PC using an Ethernet cable.
2. In the Menu, select PRINT MENU → CONFIGURATION and execute the function.
Then, check the IP address [1] of the machine.
☞ For how to execute "CONFIGURATION," see "Adjustment/Setting."
3. Copy the firmware data (XXXXX.ps) and upgrading program to any directory on the
PC.
4. Start the Command Prompt and go to the directory in which the firmware data is
stored.
5. Specify the IP address of the machine to start FTP.
6. Check the user name and then press the Enter key to go to the next step.
7. Using the "bin" command, set the file transfer mode to the binary transfer.
8. Type the hash command.
28
2
Field Service Ver. 4.0 Feb. 2006
4139F2E510DA
4139F2E511DA