Konica Minolta magicolor 2400W Service Manual page 139

12. Menu (magicolor 2450)
(6) ENABLE HTTP
Function • Specifies whether or not HTTP is used.
Use • To specify whether HTTP is used.
Setting • The machine must be restarted after the setting has been changed.
/procedure • The default setting is ON.
(7) ENABLE AUTO IP
Function • Selects whether or not the IP address is automatically acquired when DHCP/BOOTP,
Use • To automatically acquire an IP address when DHCP/BOOTP, PING, and ARP are not
Setting • The default setting is YES.
/procedure
B. IPX/SPX
(1) FRAME TYPE
Function • Sets the Ethernet frame type.
Use • To specify the Ethernet frame type for transmission.
Setting • The default setting is Auto.
/procedure
C. ETHERTALK
(1) NAME
Function • Specifies the first part of the name of the printer on the Macintosh EtherTalk (Apple-
Use • To set the Printer name displayed on the Macintosh EtherTalk (AppleTalk) network.
• The printer name can contain a maximum of 16 characters.
Setting
• The default setting is magicolor 2450.
/procedure
(2) NAME 2
Function • Specifies the second part of the name of the printer on the Macintosh EtherTalk
Use • To set the Printer name displayed on the Macintosh EtherTalk (AppleTalk) network.
• The printer name can contain a maximum of 16 characters.
Setting
• The default setting is NULL.
/procedure
104
2
ON : the Web page provided in the printer by the built-in HTTP server is enabled.
OFF: the Web page cannot be used.
"ON"
PING, and ARP are not functioning or when there is no response.
functioning or when there is no response.
"YES"
"Auto" 802.2
Talk) network, so it can be "found."
(AppleTalk) network, so it can be "found."
Field Service Ver. 4.0 Feb. 2006
OFF
NO
802.3 ETHER II SNAP