Konica Minolta magicolor 2400W Service Manual page 117

10. Menu (magicolor 2430 DL)
C. BW FACE COUNT
Function • Displays the total number of monochrome pages printed to date.
Use • To identify the total number of monochrome pages printed.
D. CONTROLLER VER.
Function • Displays the version of the controller firmware currently installed.
Use • To help determine whether the controller firmware needs to be upgraded.
• To identify the controller firmware version when the Print Control Board is replaced.
E. ENGINE VER.
Function • Displays the version of printer engine firmware currently installed.
Use • To identify the printer engine firmware version when the Mechanical Control Board is
replaced.
F. COLOR CALIBRATION
Function • Executes color calibration.
Use • To calibrate the engine when there are print image quality problems.
• To calibrate the engine when the Transfer Belt Unit and Transfer Roller are replaced
with new ones.
Setting 1. Select COLOR CALIBRATION and press the Menu Select key.
/procedure 2. The COLOR CALIBRATION is executed and, when it is completed, the initial screen
reappears.
G. REMOVE/ALL TONER
Function • Moves each color Toner Cartridge to the appropriate replacement position, one by
one, to allow all of the Toner Cartridges to be removed.
Use • To allow all of the Toner Cartridges to be removed.
Setting 1. Select REMOVE/ALL TONER.
/procedure 2. The rack rotates to bring the first color Toner Cartridge to the replacement position.
When the rack stops moving, the message "OPEN DOOR/REMOVE TONER C"
appears on the display.
3. Open the Upper Cover and remove the Toner Cartridge.
☞
For the Toner Cartridge removal procedures, see "Maintenance."
4. Close the Upper Cover. Then, the message "OPEN DOOR/REMOVE TONER K"
appears on the display.
5. Repeating the same steps, remove the remaining Toner Cartridges.
NOTE
• The Toner Cartridges are to be removed in the order of C -> K -> Y -> M.
6. Close the Upper Cover. The initial screen will then reappear.
82
Field Service Ver. 4.0 Feb. 2006