Konica Minolta magicolor 2400W Service Manual page 135

12. Menu (magicolor 2450)
E. AUTO CONTINUE
Function • Enables or disables printing when the size of the media loaded in the tray does not
Use • To print data on the media loaded in the tray of the media loaded in the tray does not
Setting • The default setting is ON.
/procedure
F. TRAY CHAINING
Function • Allows a print cycle to continue without interruption when the current tray runs out of
Use • To allow media to be pulled from another tray when the media in the first tray runs
Setting • The default setting is ON.
/procedure
NOTE
• This setting is available only when an optional Lower Feeder Unit is installed.
G. MAP
(1) MODE
Function • Selects whether or not the Tray Mapping function is used.
Use • To specify whether trays are mapped.
Setting • The default setting is ON.
/procedure
(2) LOGICAL TRAY0-9
Function • Specifies whether jobs received from another manufacturer's printer driver are
Use • To specify the media source for print jobs using another manufacturer's printer driver.
Setting • Only the default for LOGICAL TRAY 2 is PHYSICAL TRAY 2. PHYSICAL TRAY 1 is
/procedure
100
2
match that of the print data.
match that of the print data.
"ON"
media during the print cycle by automatically reselecting another tray, in which the
media of the same size and the same type is loaded.
out.
"ON"
"ON"
printed using Tray 1 or Tray 2.
the default for all trays other than LOGICAL TRAY 2.
PHYSICAL TRAY 1
Field Service Ver. 4.0 Feb. 2006
OFF
OFF
OFF
PHYSICAL TRAY 2